From the brand
Product Description
- Chapters
- descriptions off, selected
- captions off, selected
This is a modal window.
What should I pay attention to when using this electric screwdriver?
●Based on protection mechanism of 0V battery charge inhibition, please don’t leave the machine uncharged too long.
How can I see how much battery power left?
●When the battery level is below 20% in use, the indicator will blink red quickly.
●When charging, the indicator will slowly blink white.
●When fully charging, the indicator will become solid white.
Can the screwdriver be using while a charging cable is connected?
●Sorry, it can’t be used when the charging cable is connected.
What are the applicable scenarios?
●Electric screwdrivers are versatile and suitable for a variety of homeowner tasks such as furniture assembly, light DIY projects and other tasks that require a portable bit.
●It is not suitable for the repair of Precision Instruments.
What can I use this power screwdriver set for?
●Whether you’re assembling furniture, DIY-ing your heart out, or doing electrical repairs, this electric screwdriver set is your go-to guy.
Important information
21 watts
3 volts
B. Menke –
I bought this screwdriver for a project I was doing. I needed a small lightweight electric screwdriver because the project had a lot of screws that needed to be screwed in and I didn’t want to use a manual one. I bought it mainly because of the reviews and the simple elegance to it. When It arrived I was shocked! The first thing that came to mind to describe this tool is “If Apple was to make an electric screwdriver, this is what it would be”. The build quality on this is very impressive, the simplicity of the design is very Apple like. The case design is ingenious. It is a very well though out product. There is one rocker button for forward and reverse, a turn knob at the top for on/off and torque setting (of which there are three choices) and a USB-C port at the bottom end for charging, that’s it. No unnecessary buttons, knobs or extra features, just plain, simple design.So how does it work? I used it on my project and was very happy with it. It has a lot more torque than I though it would. If I had to pick a negative point on this product it would be that it has so much torque it spins the screwdriver out of your hand when your done screwing something in. Unlike a drill, which when it reaches it torque limit makes a grinding sound to let you know it doesn’t have enough torque to continue turning the screw or drill bit, this has so much torque on the lowest setting it spins the screwdriver out of your hand when you reach the end. The battery seemed to last a long time, I never ran out of power on my project and used it quite a bit. it has a nice assortment of bits that come with it and they seem to be good quality as well. The case is a metal cylinder, in which the bottom holds the bits in the outer part and the center holds the tool itself. A metal cylinder sleeve fits over it and locks into place by turning it. This is the best built, simplest design I have ever seen (again, very Apple like). I would highly recommend this product to anyone wanting a high quality, easy to use electric screwdriver.
Chris West –
This little screwdriver is surprisingly useful. It is small and lightweight but is handy and has a lot of power. The provided screwdriver bits are about 3″ long which makes them very useful and the selection of bits is handy. The screwdriver provides selection of torque ranges to make the driver more efficient. The case is well thought out and constructed of a lightweight metal that should protect the tool and bits for ever. The top of the case locks onto the base with a simple twist of the wrist and will keep bits from getting lost. I am impressed with this set and frankly I use it all the time. The tool and selection of bits allow for a variety of jobs in a convenient package.
M. Hill –
I’ve seen high praise for this cordless screwdriver from computer reviewers, and I am very impressed with it so far. The packaging is classy, and the design of the tool and its case is immaculate. It feels very solid in your hands. I used it immediately to tighten a lot of screws and hex bolts on a squeaky chair, and it made the job trivially easy.It comes with a dozen bits for hex, star, and Phillips screws in various sizes—a fairly comprehensive range. I was surprised that there was only one straight screw bit, as it’s a bit on the small side and might have trouble with large-slot screw heads. But for what you’d typically find in a computer or electronic device, it should meet most/all of your needs.
diydan –
I read a review of this on zdnet and figured I buy it to fill in the space between manual screwdrivers and the larger, clunky electric driver I have. The system has a nice sturdy feel and a ton of power. Bits are easy to swap out of the chuck but there’s not a lot of room to get them out of the base, so it can be a bit fiddly trying to get a hold of a bit to pull it out of the storage base.Another issue is the charger placement. If you want to leave it plugged in, you can’t do it with the top on. So they have this lovely compact case but they didn’t set up any way to charge the unit with the case closed. Instead you have to have the top off and the driver upside down in the base.Finally and most importantly to me is the lack of a variable speed. You put the bit in the screw slot and turn it on and if you don’t have a good grip, it just pops right out or worse, it strips the screw head. Even adjusting the torque doesn’t make much difference. If you’re just using it for easily accessible screws where you have a good hold on it and aren’t at any angle, it’s fine. If you’re under the kitchen sink with one hand on the garbage disposal and the other holding the driver at an angle trying to get it to turn slowly enough at the start to engage the threads – forget about it and use a manual screwdriver.***Update – I’m adding an extra star for superb customer service
S.D. –
Okay, so I was skeptical about this. However, I bought it, and I can say I’m very pleased with how small it is, how long the charge lasts, and how many different bits come with it. They are by no means a full array, but they are very good for quick jobs around the house. I don’t feel much of a difference between the torque levels unfortunately, and a few times I wished it had more umph, but realistically, if I need more, I should be using a drill.Great little product for little jobs! (also the color is so pretty)
Rosie –
This brand appeals to me for its sleek designs, functionality and organization. I find myself wanting to reach for this set more often than needed. The attachments snuggly fit into an almost rubber like compartment. They attach to the device magnetically but snug and secure. So efficient and easy to use. The LED light is a nice touch. It’s feels so nice in the hand and the weight is perfect! I can just play and walk around the apartment wanting to secure screws all day w this piece.I’ve already considered this to be a nice housewarming gift for a friend or for the tool/studio/workshop person in your life.I’m def. looking forward to adding more of their products to my collection.
Dylan –
Good variety of bits included up front. Not the most torque, but as much as you’d expect by the size. Very convenient and the case it comes in is great for storage. Love the usb-c
Daniel Viau –
A robust and high-quality tool
I like the solid metal construction that makes it slightly heavy but very robust. It is a high-quality tool with matching storage box and accessories. The USB C port assures quick charging and compatibility with modern chargers. The 3 levels of power are sufficient for most tasks and I only needed to use level 1 so far for my PC building. The lighting is bright enough for working in darker areas. It is compatible with all regular 1/4 inch bits and accessories that you may already have. Overall an excellent tool, especially if you buy it at a discount when Amazon has a sale.
Scott W –
Sleek and powerful
I love this thing, the build quality is very high and feels really nice to use, looks great too. A lot of power from a small form factor!
Greg Fischer –
Great for hobby
I bought mine to use with building my rc cars, and it’s fantastic. I had to buy the right bits cause the hexes it came with weren’t small enough . But the cylinder compartment that it stores in keeps all your bits for you too.I haven’t used it for anything else so I’m not sure if its good as a drill for driving screws into wood.But for light duty stuff it’s perfect.It has a light on it. Its not very bright but it does the trick..What I like the most about it is the case it comes with.I recommend to anyone who has alot of light duty screws to install.It has good battery life as well. I was able to work all day on 1 charge with it. Once again just light duty without too much resistance